Jan 08, 2021

How To Use The Real White Teeth Whitener

This is a description on how to turn on, change treatment modes and turn off your Real White LED Teeth Whitener.

There are three treatment modes- all blue led, all red led and a combination of red and blue led lights. To turn the device on, press the power button. Once you turn the device on, the mode will program in 5 seconds and your 15 minute timer will start.

Once the mode locks in, you will not be able to change the treatment selection. If you choose to change the treatment once you have set the mode or end your session before the 15 minutes, you will need to press the power button for 3 seconds to turn the device off, then press and hold the power button for 1.5 seconds to turn the device on and choose your color treatment.

Step By Step:

Turn on the device: Press the power button
The blue light will appear first
Press again to activate the red mode
Once more for the dual-mode.
Once you have selected the mode, your treatment will lock-in after 5 seconds, and the 16-minute timer will start.
Once the treatment has started, you have to start the sequence over if you wish to switch modes.

For example, if you want to use the all blue function for 5 minutes and then want to change it to the all-red function, turn the device off by holding the button for 1.5 seconds, turn it back on, and cycle through the colors until you reach the mode you want to use. After 5 seconds, the treatment will lock, and the 16-minute timer will restart. If you wish to turn off the device before the time is complete, press the power button for 1.5 seconds.